Extension Bracket Assembly - EB
The bell housing series EB are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges. These bell housing are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.
Download PDFHand Pumps - HP12 & HP16
Heavy duty construction. Renewable internal parts by replacement. Integral Relief and Release valves. Collapsible hand movement at low pressure.
Download PDFHand Pumps with Rotary Directional Control Valves - HP*-D
Hand pump model HP*-D are compact heavy duty pumps designed for industrial applications like operating small presses, fixtures as well as providing source of oil for hydraulically operated emergency equipments. These hand pumps are equipped with integral Rotary Directional Control Valve with two outlet ports for switching of the flow between the two sides of a double acting cylinder. The Rotary valve has pressure holding ability.
Download PDFHand Pumps (Tank Side Mounting) - HPTS12, HPTS16 & HPTS12-1000
Hand pumps series HPTS** are identical in specifications to series HP** pumps, except that, these pumps are meant for mounting on the side wall of oil reservoir / tank of a hydraulic system and therefore can be integrated into the main system as a stand-by pump or can be used as a power source for cylinders or jacks which need large volume of oil for their actuation by mounting them on side wall of suitably designed oil tank.
Download PDFFeed and Power Hand Pumps - HP5012 & HP5016
Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement.
Download PDFFeed and Power Hand Pumps (with small tank) - HP5012-ST & HP5016-ST
Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement.
Download PDFDirect Operated Pressure Relief Valve - DPR
Direct acting with guided cushioned poppet. Available in Cartridge, Threaded and Subplate types.
Download PDFDirect Operated Pressure control Valve - DPC
Hydraulically cushioned valves, used to control sequencing, relieving, unloading or counter-balancing operations.
Download PDFDirect Operated Pressure reducing Valve - DPM
Direct acting construction with built-in pressure relief for secondary port.By-pass Check Valve optional.
Download PDFDirect Operated Pressure sequence Valve - DPS 06
Direct acting spool type pressure sequence valve. Models available :
Internal pilot, internal drain.
External pilot, internal drain.
Internal pilot, external drain.
External pilot, external drain.
Port A normally connected to port T : control at port P port A
normally connected to port T : control at port B Four pressure
ratings 25, 50, 100, or 200 bar.For reverse free flow, optional
check valve can be supplied as a stackable module. Pressure
adjustment by screw or hand knob.
Pilot Operated Pressure Relief Valves (Cartridge Type) - PPR 06K
Two stage Spool type Relief / Reducing Valve Cartridge Low pressure
override due to larger flow area.
Two options for pressure adjustment,
- With set screw and lock nut.
- With hand knob and lock nut.
Internal drain valves can be converted to external drain.
Pilot Operated Pressure Reducing Valves (Cartridge Type) - PPM 06K
Two stage Spool type Relief / Reducing Valve Cartridge Low pressure
override due to larger flow area.
Two options for pressure adjustment,
- With set screw and lock nut.
- With hand knob and lock nut.
Pilot Operated Pressure Relief Valve (Modular Construction) - MPPR 06
Pilot operated pressure relief valve modular construction for
vertical stacking assemblies.
For Cartridge Valve details refer p09605
Interface conforming to ISO 4401 - AB - 03 -04 - A, IS 10187, DIN
24340
Four models available.
Pilot Operated Pressure REDUCING Valve (Modular Construction) - MPPM 06
Pilot operated pressure reducing valve modular construction for
vertical stacking assemblies.
For Cartridge Valve details refer p09605
Interface conforming to ISO 4401 - AB - 03 -04 - A, IS 10187, DIN
24340
Four models available.
Pilot Operated Pressure Relief Valves - PPR
Pilot operated seat type valve. High flow handling capacity, low pressure override, remote controllability and solenoid unloading possibility are the main features of these valves. Bodies available with threaded ports or sub-plate mounting style.
Download PDFPilot Operated Pressure Relief cum Unloading Valve - PPRU
Two stage poppet type Relief cum unloading valve. Additional solenoid unloading facility as an optional feature. Three standard sizes - 10, 20, & 30.
Download PDFTwo stage pilot operated construction. These valves are normally open type valves. When the pressure in the secondary port ( port B ) increases to set pressure, the valve closes against the spring.
Two stage pilot operated construction. These valves are normally open type valves. When the pressure in the secondary port ( port B ) increases to set pressure, the valve closes against the spring.
Download PDFPressure Control Modules - PCM 06-06
Designed to control double pumps of a Hi-Low system. Unloads low pressure pump when system pressure rises above the pressure set on unloader valve. Relieves high pressure pump when system pressure reaches the value.
Download PDFPressure Control Modules - PCM 20
Designed to control Double pumps of a Hi-Low system. Consists of a High pressure relief valve, a Check valve and a low pressure unloading valve. Unloading of pumps by Solenoid valve / Valves as an optional feature.
Download PDFPressure Control Modules - PCM 20-16
Designed to control Double pumps of a Hi-Low system. Consists of a High pressure relief valve, a Check valve and a low pressure unloading valve. Unloading of pumps by Solenoid valve / Valves as an optional feature.
Download PDFCounter Balance Valve - CB Design series 03
Counter balance valves are seat type valves. They offer free-flow from their port B to A and give leak free closure in opposite direction upto a predetermined pressure. This predetermined cracking pressure can be adjusted within its maximum specified range.
Download PDFCounter Balance Valve - CB Design series 30
Counter balance valves are seat type valves. They offer free-flow from their port B to A and give leak free closure in opposite direction upto a predetermined pressure. This predetermined cracking pressure can be adjusted within its maximum specified range.
Download PDFRotary Directional Control Valve - RDL 06
A lever operated rotary type directional control valve is generally used for high pressure applications at low flow. These valves are used where leak-free closure is required.
Download PDFLever Operated Directional Control Valve (Old Series) - DL10 ( Series 10 )
A lever operated rotary type directional control valve is generally used for high pressure applications at low flow. These valves are used where leak-free closure is required.
Download PDFLever Operated Directional Control Valve - DL20
Completely encapsulated control mechanism for protection against dirt. Five chamber design. Wide variety of spools available both in subplate and threaded model
Download PDFPilot Operated Directional Control Valve (New Series) - DP 10
Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.
Download PDFLever Operated Pressure Holding D.C.V. - DLS 10, DLS 20
Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of the cylinder ram. Large return oil passage to reduce pressure drops, allowing rams to return under low external forces. Valves can be connected in series for independent multiple single acting cylinder operations.
Download PDFSolenoid Pilot Operated Pressure Holding D.C.V. - DES 10, DES 20
Designed for single acting cylinders which are supposed to hold pressure. Specially suitable for rubber moulding presses. Ensure smooth decompression prior to return of the cylinder ram. Available as standard & Quick Exhaust. Large return oil passages allows rams to return under low external forces. Valves with quick exhaust feature have 2.34 times larger return passages. Provided with manual opening in case of power failures. Valves can be connected in series for independent multiple single acting cylinder operations. The valve is actuated by a solenoid controlled pilot.
Download PDFSolenoid Pilot Operated Pressure Holding D.C.V. - DES 10, DES 20
Designed for single acting cylinders which are supposed to hold pressure. Specially suitable for rubber moulding presses. Ensure smooth decompression prior to return of the cylinder ram. Available as standard & Quick Exhaust. Large return oil passages allows rams to return under low external forces. Valves with quick exhaust feature have 2.34 times larger return passages. Provided with manual opening in case of power failures. Valves can be connected in series for independent multiple single acting cylinder operations. The valve is actuated by a solenoid controlled pilot.
Download PDFSolenoid Operated Directional Control Valve (CETOP 05) - DE 10 (315 bar, 120 lpm)
4-port, spool type, solenoid operated, directional control valves
with wet armature AC or DC coils and wide variety of spool types
with spring centered and spring-offset arrangements.
Five chamber body and spool design to facilitate high flow.
Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05
interface.
Available in 52 standard, interchangeable spool configurations.
Removable wet-armature AC and DC solenoids for quick replacement and
conversions. Moulded solenoid coils to protect against moisture and
ingress of dust.
Individual solenoid plug-in connectors with indicator lights to ISO
4400 and DIN 43650.
Special R-rings for high extrusion resistance. Increased stability
under high dynamic condition.
Override for operation of valve without electrical power.
Note on solenoid identification : Solenoid "a" is close to Port "A"
and Solenoid "b" is close to Port "B" for a direct operated valve.
Lever Operated Directional Control Valve (CETOP 03) - DL 06
Completely encapsulated mechanism for protection against dirt. Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance.
Download PDFLever Operated Directional Control Valve (CETOP 03) - DL 06**-11 (New Series)
4-port, spool type, directional control valves with hand lever actuation and wide variety of spool types with spring-centered, spring-offset and detent arrangements.
Download PDFPilot Operated Directional Control Valve - DP 20
Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.
Download PDFSolenoid Pilot Operated Directional Control Valve - DEP 20
Available as spring centered, spring offset Valve mounting interface conforms to International and National standards. Minimum pilot pressure is 5 bar.
Download PDFPressure compensated flow control valve - PF
Pressure compensated. Check valve option for reverse-free flow. Four rotations of hand knob to facilitate the setting with ease. Thumb screw provision to retain valve setting. Stroke limiter available as an option.
Download PDFFlow divider valve - FD
Flow divider valves provide dual flow from a single source at a predetermined ratio, regardless of load. Maximum dividing error is 5%, Threaded port body.
Download PDFThrottle / Check Valve (Modular) - TCM 06
Double throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.
Download PDFThrottle / Check Valve (Modular) - TCM 10
Double throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.
Download PDFThrottle / Check Valve (Modular) - 2TCL10 -- (New Product)
Double throttle cum check, 2TCL10 are meant for controlling flow in one direction in circuit by simple throttling of flow. Reverse flow is free and is independent of throttle condition in opposite direction in same path.
Download PDFCheck Valve - C
These seat type valves allow free flow from port A to port B and give leak-proof closure in opposite direction. Available as inline mounting or Sub-plate mounting as per factory & ISO standards.
Download PDFCheck Valve - C (ISO)
Seat type valves. Allow free flow from port A to port Band offer
leakage free closure in opposite direction. Available in four sizes
of standard interfaces conforming to
ISO 5781
IS 10187
DIN 24340
Each model available with options of four cracking pressures :
0.5, 1.5, 3 and 5 bar.
Check Valve - CI
Seat type valves, Model CI with internal drain. Threaded or Sub-plate mounting construction. Available with two pilot piston size options only for Model CI.
Download PDFCheck Valve - CI06
Seat type valves, Model CI with internal drain. Threaded or Sub-plate mounting construction. Available with two pilot piston size.
Download PDFCheck Valve - CL
Seat type valves, CL with external drain. Threaded or Sub-plate mounting construction.
Download PDFCheck Valve - 2CI
These valves are available with the pilot operated check valve
facility on either A or B or both A and B threaded ports.
The hydraulic opening operation for free flow in reverse direction
is achieved by means of internal pilot pressure available from the
other working port.
By-pass Check Valve (Modular) - BCM
Seat type modular valve. Intended for by - passing. Pressure control valve,Pressure reducing valve etc. to achieve reverse free flow condition.Allow free flow from port A to port B or from port B to port A ( see model code ) and offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to ISO 5781, DIN 24340 or IS 10187 Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.
Download PDFPilot operated check valve (Modular) - CIM 06
These modular valves are available with the pilot operated check
valve facility on either 'A' or 'B' ports. The hydraulic opening
operation for free flow in reverse direction is achieved by means of
internal pilot pressure available from the other working port.
Interface conforming to
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
To ensure proper closure of both valve poppets, both user
connections should be unloaded when the control valve is in the
neutral by connecting with the return line.
Pilot operated check valve (Modular) - CIM 10
These modular valves are available with the pilot operated check
valve facility on either A or B or both A and B ports. The hydraulic
opening operation for free flow in reverse direction is achieved by
means of internal pilot pressure available from the other working
port.
To ensure proper closure of both valve poppets, both user
connections should be unloaded when the control valve is in the
neutral position by connecting with the return line.
Shuttle Valves - SL
Seat type construction. Automatically connects it's P port to either A or B depending upon whichever of the two ports is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank, only if, port A and port B are connected to tank. Available both in Threaded and Sub-plate type.
Download PDFPrefill valve ( PV 32 - 80 )
Intended for prefilling and exhausting of large hydraulic cylinders. Can be used as anticavitation check valves. Decompression feature is optional up to size 80.
Download PDFPrefill valve ( PV 32 - 80 )
The Prefill Exhaust Valve (PV) is a hydraulic-pilot operated check
valve with seat type construction. It allows free flow from port A
to port B. Flow from port B to port A can be enabled by applying
pilot pressure to it's port X.
The decompression feature enables the valve to open in two stages
progressively, allowing smooth and rapid exhaust of the compressed
oil. Opening and closing time of the valve can be influenced by
providing Throttle-Check Valves in the X port line.
Flanged port A of the valve housing can be rotated around vertical
axis through 360° to facilitate access to flange fixing bolts and
flange orientation
Cartridge Valves - CV 16 to CV 40
These valves are suitable for mounting in manifold cavities machined as per ISO 7368. By selecting suitable cartridge and cover, it is possible to achieve functions like Check valve, Directional control valve, Unloading valve, Throttle valve etc. These valves offer fast response, have very low internal leakage and can handle very large flow rates. The cartridges are available with two area ratios.
Download PDFTwo Port Slip-In Cartridges ISO 7368 - CV 50 to 100
Slip in cartridge valves are two port valves that can be inserted
into compact manifold control blocks, having cavities that are
machined as per ISO 7368. The function of the cartridge valve
depends on the type of control cover used. With the help of suitable
control cover the cartridge valve can assume pressure, directional,
throttling or combination of these function.
Cartridge valves are available in two area ratios and four cracking
pressures. Depending upon the function required, cartridge valve
having Suitable area ratio must be used.
The control covers will have to be ordered separately.
Joystick Controlled - 4JP 06
4JP 06 Joystick Controlled Pilot Oil Unit is a Manual Joystick control valve, meant for providing variable pilot pressure to the hydraulic components like Proportional Pilot Operated Directional Control Valves, Pumps and motors etc., which need variable pilot pressure to control their outputs. The valve has two pairs of outlets, which can be operated independently or in tandem. Depending upon the Joystick tilt, the valve provides variable pressure to one or two of its outlets at a time. The pilot pressure can be regulated in the pressure range of 6 to 19 bar.
Download PDFJoystick Controlled - JP 10
Pilot oil unit series 4JP are intended for giving sensitive pressure signals to pumps, Valves or Hydraulic motors which need to be controlled by remote pilot pressure. Functioning of these valves is based on spool type direct acting pressure reducing valve principle.
Download PDFBrake Valve (Developed for OEM Customers)
Currently we are supplying this valve to
L&T John Deere for Tractors
Telcon for Tata - John Deere Back Hoe Loaders.
Lock Valve (Developed for OEM Customers)
Lock valve, basically two position directional control valve
designed to have flexibility in diverting the flow. The valve is
provided with single pump connection, three common ports designated
as 'A' and four common tank ports designated as 'T'. In normal
position, pump flow is connected to A ports and at an angle in
between 78° - 100° port A is connected to tank with throttling
effect.
Currently we are supplying this valve to
Telcon for Tata - Hitachi Excavators.
Side Shift Lock Valve (Developed for OEM Customers)
Currently we are supplying this valve to
Telcon for Tata - John Deere Back Hoe Loaders.
Tipper Valve (Developed for OEM Customers)
Currently we are supplying this valve to
Hyva Chennai.
Shockless Valve (Developed for OEM Customers)
Currently we are supplying this valve to
Telcon
Travel Pilot Valve (Developed for OEM Customers)
Currently we are supplying this valve to
Telcon
Manifold for D.C.V. - CETOP- 4.2 - A - 05(P)
Designed specially for multistation directional control valves, CETOP- 4.2 - A - 05(P). Number of stations vary from minimum 2 to maximum 7.
Download PDFManifolds For Directional Control Valves - ( 1P 02155* )
Designed specially for multistation directional control valves,
CETOP- RP 35 H size 3.
Number of stations vary from minimum 2 to maximum 10.
Manifolds For Directional Control Valves - ( 1P 02155* )
Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available, which can be adjustable upto 10, 50, 100, 200, 350 and 420 bar. Transparent plug-in connector is available with LED
Download PDFReturn Line Filter - RF
Threaded type and Sub-plate mounting style. Paper element as filtration media. Spin-on disposable canisters. Integral by-pass check valve.
Download PDFFoot Valve
These valves are recommended , when the pumps are installed with negative suction head. Threads for the Foot valve are sized to provide approximately 3 times larger capacity of the strainer. Strainer is not included in the scope of supply.
Download PDF